Accurate Die Design - Die Specs Form

-Home Page-	-Mission Statement-	-Design Pics-
-Published Articles-	-Contact Info-	-Part Samples-
-Software Download-	-Fun Stuff-	-Die Specs Form-
	Why use us for Software or for Die Designs?

DIE SPECS FORM
Click here for instructions if this is your first time filling out this form.

If the text on this page is difficult to read, hold the Ctrl key down and roll the wheel on your mouse

towards you to make the text larger. This is standard Windows/WheelMouse functionality

that you can use in most programs such as Internet Explorer and Microsoft Office.
(You must type "Yes" in the box at the bottom of the form before the "Print results to screen" button will work.)
"ADD" in the selection boxes below refers to Accurate Die Design

**Company name

**Name of person filling out form Date

**Phone number Extension

P/N Estimated annual usage

Estimated life Parts per stroke Quoted mat'l thickness

Exact material thickness you would like us to use for designing purposes (no tolerance)

What size do you want holes pierced at? I.E. nominal, .002 under high limit, at high limit, etc.

Quoted mat'l width Quoted progression Quoted SPM Quoted # of stations

Max die size Planned press tonnage Press stroke

Die set brand Type Bushings Pins

Shut height range Feed line height range Feed direction Left to Right Right to Left

Bottom parallels yes no Top parallels yes no not sure

Plate under parallelsyes no Parallel material type HRS CRS

Setup blocks/Stop blocks required on Bottom only Bottom and top None Setup block quantity

Setup block size Setup block lead groove width and depth or none

Setup block gap with die closed

Part ejection method desired off end of die thru the die blow off part

Should die be designed so that everything is removable in the press? not necessary preferred must be

Design with gap between die blocks not necessary yes no Are die specs available? yes no

Direction you want punch side plan view drawn "open book or inverted" "x-ray" (looking down through assembled top)

Regarding the part print, what size radius should we put on corners if they are shown sharp?

Cutting steel type for die side Form steel type for die side

Cutting die block inserts Die inserts for forming and cutting are tapped c-bored n/a

Die block is tapped c-bored Die backup plates Die clearance per side

Die land Die taper Punches enter die

Design with die buttons or integrate pierce holes into die block?Die buttons Pierce holes part of die block Both

Heads on die buttons? yes no n/a Pierce punch type Headed Ball Lock

Cutting steel type for punch side Form steel type for punch side

Punch retainer mat'l Punch retainer inserted Punch retainer is tapped c-bored

Steel type for pierce punches & die buttons Coating on pierce punches

Pierce punch brand Sharpening collars no yes Punch backup plates

How do you want shaped punches keyed?

Pilot size Pilot pierce hole size Pilot clearance size in die side

Pilots retained in punch retainer or stripper? Punch retainer Stripper Not sure

Pilot nose type Angular (also called "positive pickup") parabolic (traditional bullet nose)

Pilot extension length beyond stripper face? Pilot lifters unsure yes no

*Stripper style Mat'l Insert or face mat'l Guide type

Stripper to punch clearance - Guided clearance per side Non-Guided clearance per side

*Stripper pressurized by Coil spring containment

Nitrogen cylinder brand Nitrogen diameter and type/catalog number

Stripper retention method Unified screw caps *Lifter type

If stripper is guided, what type of pins and bushings?

If stripper is retained by spools, what type and brand?

*Stock guides *Start strip method

* Indicates multiple selections are allowed by depressing the Ctrl key while making selections.

** Required fields.

You must type "Yes" in the box below before the "Submit and print results to screen" button will work.
**Ready to print results to screen?

IMPORTANT! PLEASE PRINT THE SCREEN CONTENTS AFTER CLICKING THE

"Submit form and print results to screen" BUTTON BELOW.

______________________________________________
12835 West Verona Drive, New Berlin, WI 53151

Tel: 262.938.9316 Fax: 262.938.3933

email: ray.proeber@accuratediedesign.com